The Maker Pi RP2040 board is aimed at robotics with features such as a 2-channel DC motor driver, 4 servo motor ports, 7 Grove I/O connectors, and lots of LEDs connected to the I/O pins which can be used for troubleshooting. The DC motor driver…
In this article we will display a digital clock using a Pico Scroll Pack Getting started The labels on the underside of Pico Scroll Pack will show you which way round to plug it into your Pico – just match up the USB port with…
In this article we look at the Pico Scroll Pack which 119 white LEDs in a tidy 17×7 matrix, as well with four tactile buttons for interacting with your Pico. The brightness of each LED is individually controllable an d its ideal for a text…
In this article we look at the Pico Display Pack which is an 18-bit capable 240×135 pixel IPS display. The pack also has four tactile buttons and an RGB LED that you can use as an indicator. Features 1.14” 240×135 pixel IPS LCD screen…
In this example we connect a PCF8574 expander to a Raspberry Pi Pico Description This 8-bit input/output (I/O) expander for the two-line bidirectional bus (I2C) is designed for 2.5-V to 6-V VCC operation. The PCF8574 device provides general-purpose remote I/O expansion for most microcontroller families…
In this article we connect a DS18b20 module to a Raspberry Pi Pico and we will use micropython to display the temperature returned from the module. I used the following DS18b20 module Specifications The following is from the datasheet The DS18B20 digital thermometer provides 9-bit…
In this article we connect a WS2812 module to a Raspberry Pi Pico and we will use micropython to display various colours on the module. The WS2812 can also be known as neopixels, this is Adafruit’s naming of the module I used the following WS2812…
In this article we present our first micropython example on a Raspberry Pi Pico, rather than just use the default example to flash an LED, we will connect an RGB led up to. Tri-color LEDs contain three different LED emitters in one case. Each emitter…
In this article we look at another Raspberry Pi Pico board, this one is the Cytron Maker Pi Pico. The Maker Pi Pico is a board for the Raspberry Pi Pico, it comes in 2 variants one of these has a Raspberry Pi Pico soldered…
This is not a SBC like a standard Raspberry Pi, you cannot run an operating system like linux on it. Think of an Arduino Nano from a size point of view but way more powerful and an Arduino from a development point of view You…
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Read More