In this article, we connect a KY-021 Mini Magnetic Reed Switch to a Raspberry Pi Pico, any Rp2040 type board will be suitable. We actually tested this with a Cytron Maker Pi Pico We will use Micropython for these examples but of course you can…
rp2040guy71
-
-
In this article, we connect an KY-029 Dual Color LED to a Raspberry Pi Pico, any Rp2040 type board will be suitable. We actually tested this with a Cytron Maker Pi Pico The KY-029 Dual Color LED module can emit red and green light. You…
-
In this article, we connect an KY-011 Dual Color LED to a Raspberry Pi Pico, any Rp2040 type board will be suitable. We actually tested this with a Cytron Maker Pi Pico The KY-011 Dual Color LED module can emit red and green light. You…
-
In this article, we connect a KY-015 Temperature Sensor to a Raspberry Pi Pico, any Rp2040 type board will be suitable. We actually tested this with a Cytron Maker Pi Pico We will use Micropython for these examples but of course you can use the…
-
This is an RP2040:bit Board Based On Raspberry Pi Microcontroller RP2040 but is the same size and pinout as the BBC Micro:bit Features On-board W25Q16 16M flash Memory chip On-board 5×5 LED matrix, each LED can be programmed separately. On-board two programmable buttons. You get…
-
In this example we use LEDs connected to the following pins – 16,17,18,19,20,21,22,26,27,28 to create the knight rider effect I tested this with cytron maker pi pico as it has LEDs connected to all the outputs Schematic If you want to build its fairly simple,…